To ensure that the Shaft Grounding System is in proper working condition, frequently make the following inspections:
-
Inspect the holder for any signs of wear or damage as well as any excessive build up of dirt or foreign material.
-
Check for any cracking or breakage of components or welds.
-
Confirm the “snap in” pressure when installing or removing the rope holder is relatively equal to the other rope holder.
-
Verify that the meter switch works properly.
-
Confirm the rope guide is not contacting the shaft. There should be a 1/16 in gap between the rope guide and the face of the shaft.
-
Inspect the integrity of the rope guide and attachment arms.
-
Make sure the terminal connection area on the mount is not excessively worn or pitted.