This section provides detailed technical information on the Premium Monitoring System capabilities and legal information.
Standard Data Collection
|
Monitored Line |
Bandwidth |
Attenuation Ratio |
|---|---|---|
|
Ground Current |
1 MS/s or 222 kHz |
30 A : 10 V |
|
Shaft Voltage |
1 MS/s or 222 kHz |
100 V : 10 V |
|
Exciter Shaft Voltage |
1 MS/s or 222 kHz |
100 V : 10 V |
-
Average voltages and currents are calculated on the samples taken during each snapshot as the sum of (x)/N, where x is the array of samples acquired, and N is the number of samples.
-
Zero-to-peak voltages and currents are calculated on the samples taken during each 0.02 second period by the following formula:
-
The longer-term averages are calculated by accumulating averages for the specified period. They are then reset in preparation for the next calculation. The formula used is as follows:
|
Document Name |
Document Number |
|---|---|
|
Shaft Grounding System Operations Manual |
Series 1: EZDP-2007 Series 2: EZDP-2035 Series 3: EZDP-2068 |
|
Premium Monitoring System Installation Planning Guide |
EZDP-2078 |
|
Premium Monitoring System Wiring Diagram |
Refer to Product Part Number (e.g. EGMA-401) |
|
InsightCM Installation Manual |
Refer to the InsightCM installation instructions on the Cutsforth Support Webpage |
|
Activating InsightCM Server License |
Refer to the InsightCM licensing instructions on the Cutsforth Support Webpage |