Adding Fault Frequencies to an Asset

Click Configuration () and ensure you are on the Asset Configuration page.

Right-click on an asset and select Add fault frequencies to add the Fault Frequencies tab to your asset's configuration panel.

Click Add in the Fault Frequencies.

1. Specify a name, fault type, and level.

2. Click OK.

Create fault frequency groups to define a set of fault frequencies to refer to by name.

1. Click Edit Groups and then click Add in the resulting dialog box.

2. In the resulting New Fault Frequency Group dialog box, enter a name for the group. Click OK and the name of new group will appear in the Group section.

3. Click the name of the group and then click Add in the Fault Frequencies section to specify the frequencies you want to include in the group.

4. In the Fault Frequencies section, click Add to display the Fault Frequency dialog box.

5. Specify a name, fault type, and level.

6. Click OK.

Click Close.

Click the Navigation menu () and select Systems»Asset Definition.

Select an asset type and in the configuration panel on the right, select the Fault Frequencies tab.

Click Edit Groups to add a fault frequency group.

In the Fault Frequency Groups dialog box, click Add to launch the New Fault Frequency Group dialog box.

Enter a name for the group and click OK.

Select the name of the new group and, in the Fault Frequencies panel of the dialog box, click Add.

This enables you to specify the frequencies you want to include in the group.

Specify a name, type, and level for the fault frequency you are including in the group and click OK.

Click Close.

Click Add in the Fault Frequencies Group section.

Select the new group you had added from the pull-down and click OK.

In the lower half, click Add to display the Fault Frequency dialog box.

Specify a descriptive name for the fault frequency.

Select a type of frequency using the pull-down and specify the level of the frequency using the spin box.

Click OK to return to the Fault Frequencies tab.