Inspecting Shaft Grounding Assembly | Series 2

Related Products:

EGSA-210, EGSK-201, EGSK-301

Related Documents:

EZDP-2035

Type:

Installation

Keywords/Labels:

Shaft Grounding, Inspection

Summary:

Considerations to be used in inspecting the Shaft Grounding Assembly for wear or contaminants.

Inspecting the Shaft Grounding Assembly

To ensure that the Shaft Grounding Assembly is in proper working condition, make the following inspections frequently:

  • Check for any cracking or breakage of components

  • When installing or removing the rope, check the “snap in” pressure .

  • Confirm that the rope guide is not contacting the shaft. There should be approximately 1/16 in between rope guide and the face of the shaft.

  • Inspect the integrity of the rope guide and attachment arms.

  • Inspect the shaft condition for any visible signs of wear, pitting, grooving, contaminants, and so forth.

  • Inspect ropes for wear and contaminants.

Do you need more help?

Submit your questions or requests using the Support Ticket Submission form.

Was this article helpful?
0 out of 0 found this helpful