Calibration and Preventative Maintenance

Related Products:

EAMA-001, EAMA-002, EAMA-003, EAMA-004, EAMA-005, EAMA-201, EGSA-013, EGSA-015, EGSA-210, EGSA-220, EGSA-310, EGSA-320, EXMC-001, EXMC-002

Related Documents:

EZDP-2089, EZDP-2104




cleaning components, current sensor, voltage sensor, system performance


This topic provides information on calibration and preventative maintenance.

Calibration and Preventive Maintenance

Visually Inspect and Clean Generator Field Monitoring System Electrical Components

PM Need: Required  

Frequency: Annually  

Action: Using a compressed-air duster approved for electronics, blow all dust and debris off the electrical components inside the Generator Field Monitoring System.


Check Current Sensor, Voltage Sensor, and System Performance

Calibration Need: Advised  

Frequency: Annually, as outage schedule permits, or if measurements suggest readings are inaccurate.


Do you need more help?

Was this article helpful?
0 out of 0 found this helpful

Articles in this section