1. Cutsforth Support
  2. Shaft Ground Monitoring: Premium | Series 3
  3. Maintenance

Calibration and Preventative Maintenance

Follow

Related Products:

 EGMA-401, EGSA-310, EGSA-320, EGSK-404, EGSK-405, EXMC-001, EXMC-002

Related Documents:

EZDP-2080

Type:

Maintenance

Keywords/Labels:

cleaning components, current sensor, voltage sensor, system performance

Summary:

This topic provides information on calibration and preventative maintenance.

Calibration and Preventive Maintenance

 

ELECTRICAL DANGER

Calibration and maintenance is to be conducted only by qualified electrical and monitoring systems personnel.

 

ELECTRICAL DANGER

Follow all plant safety and lock-out/tag-out requirements before accessing the equipment referenced in these procedures.

Visually Inspect and Clean Premium Monitoring System Electrical Components

PM Need: Required  

Frequency: Annually  

Action: Using a compressed-air duster approved for electronics, blow all dust and debris off the electrical components inside the Premium Monitoring System.

 

Check Current Sensor, Voltage Sensor, and System Performance

Calibration Need: Advised  

Frequency: Annually, as outage schedule permits, or if measurements suggest readings are inaccurate.

 
 

Do you need more help?

 

Submit your questions or requests using the Support Ticket Submission form.

 
 
Was this article helpful?
0 out of 0 found this helpful

Articles in this section