Related Products:

EMMK-101, EMMK-102, EMMK-103

Related Documents:

EZDP-2055

Type:

Operation

Keywords/Labels:

Alarm Setup

Summary:

Describes how to set up a trend alarm

Setup Alarms

Complete these steps to set up a trend alarm:

  1. Click the wrench icon and select Assets.

    2055-SetUp-Alarms-1.png
  2. Select an asset on the left-hand side of the screen from the Asset Configuration page.

    2055-AlarmSetup-2.png
  3. Go to the Trend Alarms tab and click Add.

    2055-AlarmSetup-3a.png
  4. When the Trend Alarm Rule window opens, select the feature you want to add the alarm to from the drop-down menu at the top-left of the screen.

    2055-AlarmSetup-3.png
  5. Select the Operating State for the alarm.

    2055-AlarmSetup-4.png
  6. Select the comparison value for the alarm.

    2055-AlarmSetup-5.png
  7. Click + Add.

    2055-AlarmSetup-6.png
  8. From the Trend Alarm Rule Level window, select the severity of the alarm (low, moderate, or high).

    2055-AlarmSetup-7.png
  9. In the Compare To field, enter the level to which you wish to compare the trend (alarm setting).

    2055-AlarmSetup-8.png
  10. Select Send Email and set the Email Settings fields if you want to set up an email notification for a triggered alarm.

    Note

    You must set up the email address group and email template you wish to use to be able to fully use this feature. See Setup Alarm Emails.

    2055-AlarmSetup-9.png
  11. Click OK to save this trend alarm.

  12. Repeat this procedure as necessary to add different alarm levels and for different features.

    2055-AlarmSetup-11.png

Do you need more help?

Was this article helpful?
0 out of 0 found this helpful