Related Products:

EZBA-001

Related Documents:

EZDP-2016

Type:

Installation

Keywords/Labels:

Brush holder, Diagram

Summary:

Graphic introduction to the individual parts included in the installation package for the Cutsforth Brush Holder

Required Tools

These tools are required for installing the adapters and holder mounts:

  • 1/2 in Box end wrench

  • 5/32 in Hex wrench

  • Torque wrench with 1/2 in socket and 5/32 in Hex driver

Components

The following parts are included in the Brush Holder installation package:

12 Adapters with cross-hole threads

EZDP-2016-Components-AdaptersWithThreads.png

12 Adapters without cross-hole threads

EZDP-2016-Components-AdaptersWithoutThreads.png

48 Cutsforth Brush Holders

EZDP-2016-Components-BrushHolder.png

48 Brush kits

EZDP-2016-Components-BrushKit-1.png

1 Brush changing key

EZDP-2016-Components-ChangingKey.png

1 Height setter

EZDP-2016-Components-HeightSetter.png

48 Holder mounts with 1/4-28 in button head cap screws with Nl6 Nordlock washers

EZDP-2016-Components-Mounts.png

24 5/16-18 x 3.5 in Bolts and NL8 Nordlock washers 

EZDP-2016-Components-BoltNorlockWasher.png

Salvage these parts from the old equipment. These parts do not require removal from the generator:

1 Barrier

 

EZDP-2016-Components-Barrier.png

2 Yokes with hardware

 

EZDP-2016-Components-Yoke.png

3 Stud insulation sleeves

 

EZDP-2016-Components-InsulationSleeves.png

12 Spacers

 

EZDP-2016-Components-Spacers.png

Do you need more help?

Was this article helpful?
0 out of 1 found this helpful