Related Products:

EGSA-210, EGSK-201, EGSK-301

Related Documents:





Shaft Grounding, Installation


Instructions for making sure rope contact points are touching the rope guide spaces and tightened.

Securing the Rope Guide

  1. Adjust each rope guide section so that the contact points (A) are touching the 1/16 in rope guide spacer.

  2. Tighten all the 5/16 in-18 x 5/8 in bolts (B) on the rope guide starting closest to the attachment arm side of the assembly, and then work around from there. Torque all the bolts to 220 in lbs.

  3. When all rope guide bolts are torqued and the rope guide is secured, remove the rope guide spacer.


Do you need more help?

Submit your questions or requests using the Support Ticket Submission form.

Was this article helpful?
0 out of 0 found this helpful