Related Products: |
EGMA-004, EGMA-005, EGMA-006, EGMA-007, EGMA-008, EGMA-013, EGMA-015, EGMA-016, EGMA-019 |
Related Documents: |
EZDP-2020 and EZDP-2038 |
Type: |
Operation |
Keywords/Labels: |
Premium Monitoring System, Operation |
Summary: |
Instructions on operating the Premium Monitoring System directly after install and details regarding using the unit for the first time. |
Print out the next page, and then record the readings as described in the following procedures.
When the Premium Monitoring System is First Installed, Before the Generator is Brought Online or Put On Turning Gear
Power on the Premium Monitoring System.
When the Premium Monitoring System Application starts, ensure that monitoring is not paused and Unit Status is GEN OFF. If it is not, contact Cutsforth immediately for instructions.
Go to either the SHAFT SETTINGS page or the ROPE SETTINGS page and click RECORD WVFM’S.
Record the readings in Column A in the first table on the next page.
While the Generator is on Turning Gear, but Prior to it Coming Online
The Unit Status should be GEN OFF. If it is not, or if the Unit Status indicates GEN ON prior to the generator coming online, contact Cutsforth immediately for instructions.
Capture waveforms as described in Step 3 above.
Record the readings in Column B in the first table on the next page.
Within 2 Minutes After the Generator Comes Online
The Unit Status should change to GEN ON. If it does not, contact Cutsforth immediately for instructions.
Capture waveforms as described in Step 3 above.
Record the readings in Column C in the first table on the next page.
After the Generator has been Online for One Hour
The Unit Status should still be GEN ON. If it is not, contact Cutsforth immediately for instructions.
Capture waveforms as described in Step 3 above.
Record the readings in Column D in the first table on the next page.
Readings from First-Time Operation
A |
B |
C |
D |
|
|---|---|---|---|---|
Date |
||||
Time (hr and min) |
||||
HOME page: Ground Current Zero to Peak (amps) |
||||
HOME page: Shaft Voltage Zero to Peak (volts) |
||||
HOME page: Exciter Shaft Voltage Zero to Peak (volts) |
||||
ROPE STATS page: Ground Rope Wear Indicator V LIVE |
||||
ROPE STATS page: Metering Rope Wear Indicator V LIVE |
||||
ROPE STATS page: Exciter Metering Rope Wear Indicator V LIVE |
Your Plant Information
Plant name |
State |
||
Unit name |
MW |
||
Generator manufacturer |
Fuel type |
||
Plant contact |
Phone |
||
|
Cutsforth tag number (on the inside of the monitoring system front door): 1 2 ___ ___ ___ Example tag: | |||
When You Have Completed the Procedure
Download the waveforms that you saved during the procedure to your flash drive using the Premium Monitoring System File Manager.
Save this page and the waveforms for future reference.
Submit your questions or requests using the Support Ticket Submission form.