Related Products: |
EGMA-004, EGMA-005, EGMA-006, EGMA-007, EGMA-008, EGMA-013, EGMA-015, EGMA-016, EGMA-019 |
Related Documents: |
EZDP-2020 and EZDP-2038 |
Type: |
Technical information |
Keywords/Labels: |
Premium Monitoring System, Technical Specifications |
Summary: |
Description of the storage capacity on the CMS for waveform files and snapshots with SD card information and approximate storage times. |
The threshold and operator-initiated waveform files are accessible for download or deletion via the Premium Monitoring System Application’s File Manager.
Each event waveform snapshot recording is defaulted to 0.02 seconds long and captures 1.2 shaft rotations when the unit is operating at 3,600 RPM.
Each 6-hour waveform snapshot recording is defaulted to 0.02 seconds long and captures 1.2 shaft rotations when the unit is operating at 3,600 RPM.
Each 0.02 second snapshot is approximately 7.9 MB in size, but will vary depending on the user-set snapshot length.
Unit storage dedicated to event snapshots is just over 1 GB and accommodates approximately 120 snapshots before the Storage Low indicator lights up and the external LED flashes, if installed.
The system’s SD card storage is located in D:\Baseline Recordings. This folder is required for the Premium Monitoring System to operate and is dedicated to recording a snapshot every 6 hours for a total of four snapshots every 24-hour period that the generator is operational. 32 GB of storage is dedicated to the 6-hour snapshots and will accommodate between 2 and 3 years' worth of snapshots as measured in unit operating time.
Submit your questions or requests using the Support Ticket Submission form.